 |
 |
 |
|
Setup Guide |
User Manual |
List of Supported IP Cameras |
More Info
The IP Camera Tester combines an analog video tester, PTZ camera controller, and IP digital video tester into a single hand-held device, utilizing an ultra-bright, high-resolution 3.5 Inch Color LCD Screen, which makes all camera adjustments a snap.
IP Camera Tester benefits users by providing various network protocol compatibilities. With customized built-in codec, IP Camera Tester is capable of decoding video streaming simultaneously and allowing users to view and to adjust focus on the monitor. The Tester also operates on both NTSC and PAL TV system by standard BNC video input. Moreover, it has a phone-jack that allows users to test for audio if available. Furthermore, IP Camera Tester runs by a rechargeable battery that provides the Tester with up to three hours of operating time. This tester is designed mainly for AXIS IP cameras but with the new firmware upgrade*, this service tester will work with other major name brand IP cameras.
* Please visit manufacturer's website to download the firmware upgrade
| Features |
AAS-LCDA-1 |
| Color LCD Field Display |
3.5" 320x240 |
| AV |
|
| Video Input |
BNC x 1 |
| Video Output |
BNC x 1 |
| Video Output Signal Format |
Video ByPass & Color Patterns x 8 |
| PTZ Camera |
|
| PTZ Control |
RS-485 |
| RS-485 Ports |
R+, R-, T+, T- |
| PTZ Camera Setting |
Pan, Tilt, Zoom, Manual Focus, Auto Focus |
| Support Protocols |
DSCP, Pelco D, Pelco P, AD422, Panasonic_C, Panasonic_N, JVC, Fastrax 2 |
| IP Camera |
|
| LAN In |
10/100 Mbps, 48VDC In, Power Bank In |
| LAN Out |
10/100 Mbps, 802.3af standard |
| IP Camera Setting |
IP Address setting, Image Setting |
| Support Brands |
AXIS, DynaColor, ACTi, A-MTK, Arecont Vision, Hunt, IQinVision, Luxon, Planet, Pixord, Sanyo, Sony, Vivotek, Zavio |
| CAT-5 |
|
| CAT-5 Port |
1 |
| Operation |
|
| Weight include Batteries |
450 g |
| Battery Type |
2 x 3.7 V Li-Ion, 2000mAh |
| Charge Cycles @ 80% capacity |
> 300 |
| Charging Time |
3.5 Hrs |
| Operating Time |
3 Hrs |
| Network |
|
| IP Setting |
DHCP, Static IP |
| Size |
|
| Dimension (LxWxH) |
170x99x38 mm |
| |
General Specifications |
| Electronic |
Input Voltage |
DC12V, 5A |
| Video |
Signal Format |
NTSC or PAL |
Video Level |
1Vpp, 140IRE |
| PTZ Control |
Data Communication |
RS-485 |
| IP Camera |
Connection |
RJ-45 |
| CAT-5 Cable Test |
Detects |
Straight/Cross Cables, Open, Short, Miswire |
| USB |
Type |
USB 2.0 |
| SD Card |
Type |
SDHC supported |
| Audio |
Input |
Line In |
Output |
Built-In Speaker Phone Jack Φ3.5 |
| POE |
By Pass / Power Bank |
PoE LAN In |
Device |
Internal Battery |
*Specifications are subject to change without notice.
T-83
- One (1) IP Camera Tester
- One (1) Soft Silicone Gel Case
- One (1) Soft Carrying Pouch (with Sunshield & Neck Strap)
- One (1) 7.4V Li-ion Battery Pack
- One (1) 12V DC, 5A Power Supply *Power cord not included
- One (1) RS485 Plug
- One (1) BNC Cable
- One (1) Network Cable
- One (1) UTP Terminal Block
- One (1) User Manual
- One (1) Quick Setup Guide
- One (1) Supported IP Cameras List
Optional Power Bank Package(12V DC Main Power Adapter, PSE Out with RJ45 Jack, DC Jack Cable)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Analog + IP + PTZ camera tester
- Built-in 3.5” LCD monitor with QVGA resolution
- 10/ 100Mbps Ethernet with RJ-45 connector
- PTZ control/ command parse via Ethernet and RS-485 interface
- Built-in touch panel/ keypad.
- High capacity Lithium battery
- UTP cable test
- H.264 and MJPEG video compression
- NTSC/PAL Video in/ Audio in/ Speaker out
- PoE/ PoE+ function support (25.5W)
- PoE voltage, current, and power consumption measurement
- Local recording and playback
- CGI command configuration
- 3rd Party IP camera support
|
|
|
|
|
|
|
DVR / NVR System
