Clearance

Join our mailing list!






Alarm CCTV: Home > Others > Video Ground Loop Isolator Filter
Sort By:
Page of 1
C-42 High Performance Ground Loop Isolator - Video BNC Passive Video Balun with High Performance Ground Loop Isolator
Our Price: $25.50
more info
Our Price: $30.00
more info
Video Ground loop Isolator, Surge protectors, BNC Data, UTP balun Passive Video Balun with High Performance Ground Loop Isolator

Product Code: UTP-VGIBNC
PIC: C-42

Features:
  • BNC male to BNC female with mini cable - 7.87" / 200mm on both sides.
  • Built-in TVS (Transient Voltage Suppressors) for surge protection.
  • High Performance to eliminate ground loop problem.
  • Low video loss, Bandwidth: 0-3dB / 0-10MHz
  • Passive; No power required.
  • Prevents video-signal distortion caused by video ground loops.
  • Eliminates picture tearing, cross talk, and rolling.
  • Prevents power cables laid by others interfering with the CCTV system.
  • It is useful where a video signal is transmitted via cable between points with different ground potentials.


Product Code: UTP-VPIG100L
PIC: A-2G

Features:
  • Uses an Unshielded Twisted Pair cable (UTP), like CAT5, to transmit full motion camera video signal up to 300m / 1000ft when working with Passive Balun and max. 600m / 2000ft when working with Active Balun.
  • High Performance isolator filter effectively prevents ground loop video signal distortion
  • Low video loss, Bandwidth: 0~3dB / 0~10MHz
  • Effectively eliminate screen tearing, cross talk and rolling, etc.
  • Real-time transmission of video signals with a clear, high quality video
  • It is useful where a video signal is transmitted via cable between points with different ground potentials
  • Built-in Filter: 0~6MHz with Extra Interference Rejection
  • Built-in Transient Voltage Suppressors (TVS) for surge protection
  • Passive Video Balun Surge Protection 2kV, 10/700µs, Standard: IEC61000-4-5
  • Ground Loop Isolator Surge Protection 4kV, 10/700µs, Standard: IEC61000-4-5
  • Electrostatic Discharge Protection (ESD) Standard: IEC61000-4-2
  • Passive, no power required