10ft~50ft 315Mhz Outdoor Solar Power Wireless Photobeam Sensor
|
|
51ft~100ft 315Mhz Outdoor Solar Power Wireless Photobeam Sensor
|
|
101ft~250ft 315Mhz Outdoor Solar Power Wireless Photobeam Sensor
|
|
|
|
|
|
|
Product Code: SS-SWPB-50 PIC: S-61
Features:
- Detection Range: 50ft
- Power Consumption: 200uA (fully charged sensors can operate more than 30 days without sunlight)
- Frequency: 315MHz
- RF Range: 2000ft / 600m open area
- Response Time: 50ms
|
Product Code: SS-SWPB-100 PIC: S-62
Features:
- Detection Range: 100ft
- Power Consumption: 200uA (fully charged sensors can operate more than 30 days without sunlight)
- Frequency: 315MHz
- RF Range: 2000ft / 600m open area
- Response Time: 50ms
|
Product Code: SS-SWPB-250 PIC: S-63
Features:
- Detection Range: 250ft
- Power Consumption: 200uA (fully charged sensors can operate more than 30 days without sunlight)
- Frequency: 315MHz
- RF Range: 2000ft / 600m open area
- Response Time: 50ms
|
|
251ft~400ft 315Mhz Outdoor Solar Power Wireless Photobeam Sensor
|
|
Vandal Cover Protection
|
|
4 Zone Non-Supervised Wireless Receiver
|
|
|
|
|
|
|
Product Code: SS-SS-SWPB-400 PIC: S-64
Features:
- Detection Range: 400ft
- Power Consumption: 200uA (fully charged sensors can operate more than 30 days without sunlight)
- Frequency: 315MHz
- RF Range: 2000ft / 600m open area
- Response Time: 50ms
|
Product Code: STI-9624
Features:
- Super tough construction of 9-gauge coated
steel wire makes STI Smoke Beam Guards
extremely difficult to break.
- Coated with
a tough, corrosion resistant polyester shell.
- Protection against misalignment and false
fire alarms.
- Designed to protect both
transmitter and receiver units.
- Three year
guarantee against breakage in normal use.
- Fast and easy installation.
- May be painted once prior to installation
|
Product Code: SS-SWPREC1 PIC: S-65
Features:
- 315MHz frequency
- SS-SWPREC1 wireless receiver is compatible with SWPB series solar powered wireless photobeam sensors or other Visonic sensors
- Receive RF signals from its learned sensor and provide alarm beeping sound
- Transmission distance up to 500ft
- Ability to indicate which zone is alarming and provide tamper switch, battery low, supervision reports for each zone
- N.O./N.C. output
- "Beep Beep" Alert with every Trigger
- Ideal for driveway, surrounding walls, swimming pool and other places
*9V DC 200mA Power Supply with Built-in Power Supply Backup Included
|
|
NIR Retro-Reflective Entry Alert System up to 22ft with Speaker Kit.
|
|
Solar Powered Wireless Signal Repeater
|
|
Solar Powered Wireless Siren
|
|
|
|
|
|
|
Product Code: SA-E-931CS22RRC
Features:
- For monitoring an entrance or using an entrance indicator.
- Photoelectric beam sensor.
- Makes “ding-dong” or siren sound if beam is interrupted.
- Speaker volume can be adjusted to turned off.
- When in siren mode, sounding time is adjustable from 3 to 30 seconds.
- 9VDC adapter included.
- All components plug into each other. No hard wiring required. 32ft cable from speaker to sensor.
|
Product Code: SS-SWPREPT PIC: S-66
Features:
- RF frequency: 315MHz
- Extends solar beam signal up to 2000ft in clear line of sight
- No wires needed
|
Product Code: SS-SWSIREN PIC: S-67
Features:
- RF frequency: 315MHz.
- RF range to beam sensor: 2000ft (open area / clear line of sight)
- RF range to remote controller: 250ft / 80m (open area)
- No cable wire is needed; no maintenance is needed
- Tamper protected
- Low voltage report
- Built-in 110dB siren
- Can work one moth without sunlight
- Solar powered wireless repeater (SS-SWPREPT) can be used to enlarge its RF range
|
|
Reflective beam sensor. Range up to 35ft. 12-24 VAC/DC. N.O./N.C. alarm output.
|
|
External Solar Cell Charger
|
|
Thin design (22"x1/8"x1-5/16"x22 1/2") for windows, doorways, skylights.
|
|
|
|
|
|
|
Product Code: SA-E-931-S35RRQ
Features:
- Weatherproof (IP 66) design for indoor/outdoor use
- Dark ON operation
- Pre-wired 6-foot cord
- Adjustable sensing distance
- NO/NC/COM relay output
- Compact size
|
Product Code: SS-SWEXCELL PIC: S-68
Features:
- 315MHz frequency
- Compatible with SWPB series photobeam sensors
- Used for photobeam sensors installed In environments without or little sunlight or shadowed areas
- Dual Cell Charger for winter time
- Add on additional External Solar Cell Chargers for better charge times In non-ideal shadowed environments
|
Product Code: SA-E-9622-4B25
Features:
- Install in windows, doorways, skylights, fence tops, any place where space is limited
- Triggers on breaking of any single or 2 adjacent beams (programmable)
- Rugged aluminum construction
- Weatherproof IP65 construction
- Anti-tamper circuit triggers alarm if power is cut or end cap is removed
- No synchronizing wires required
- NO/NC Relay output, 1A@12~24VDC
- LED alignment indicator
- “L” Brackets and mounting hardware included
- Multi-Frequency: Reduces interference and eliminates crosstalk when multiple units are used in close proximity to one another.
|
|
Visonic 1 Zone Fully Supervised Wireless Receiver work with SWPB Series
|
|
Thin design (22"x1/8"x1-5/16"x60 1/8") for windows, doorways, skylights.
|
|
Visonic 4 Zone Fully Supervised Wireless Receiver work with SWPB Series
|
|
|
|
|
|
|
Product Code: VS-MCR304
Features: - Compatible with SWPB Series
- Frequency 315MHz
- Format-1C Output
- 12V DC
|
Product Code: SA-E-9660-8B25
Features:
- Install in windows, doorways, skylights, fence tops, any place where space is limited
- Triggers on breaking of any single or 2 adjacent beams (programmable)
- Rugged aluminum construction
- Weatherproof IP65 construction
- Anti-tamper circuit triggers alarm if power is cut or end cap is removed
- No synchronizing wires required
- NO/NC Relay output, 1A@12~24VDC
- LED alignment indicator
- “L” Brackets and mounting hardware included
- Multi-Frequency: Reduces interference and eliminates crosstalk when multiple units are used in close proximity to one another.
|
Product Code: VS-MCR308
Features: - Compatible with SWPB Series
- Frequency 315MHz
- Format-1C Output
- 12V DC
|
|