Product Code: UTP-VGIBNC PIC: C-42
Features:
- BNC male to BNC female with mini cable - 7.87" / 200mm on both sides.
- Built-in TVS (Transient Voltage Suppressors) for surge protection.
- High Performance to eliminate ground loop problem.
- Low video loss, Bandwidth: 0-3dB / 0-10MHz
- Passive; No power required.
- Prevents video-signal distortion caused by video ground loops.
- Eliminates picture tearing, cross talk, and rolling.
- Prevents power cables laid by others interfering with the CCTV system.
- It is useful where a video signal is transmitted via cable between points with different ground potentials.
|
Product Code: UTP-VPIG100L PIC: A-2G
Features:
- Uses an Unshielded Twisted Pair cable (UTP),
like CAT5, to transmit full motion camera video signal up to 300m /
1000ft when working with Passive Balun and max. 600m / 2000ft when working with Active Balun.
- High Performance isolator filter effectively prevents ground loop video signal distortion
- Low video loss, Bandwidth: 0~3dB / 0~10MHz
- Effectively eliminate screen tearing, cross talk and rolling, etc.
- Real-time transmission of video signals with a clear, high quality video
- It is useful where a video signal is transmitted via cable between points with different ground potentials
- Built-in Filter: 0~6MHz with Extra Interference Rejection
- Built-in Transient Voltage Suppressors (TVS) for surge protection
- Passive Video Balun Surge Protection 2kV, 10/700µs, Standard: IEC61000-4-5
- Ground Loop Isolator Surge Protection 4kV, 10/700µs, Standard: IEC61000-4-5
- Electrostatic Discharge Protection (ESD) Standard: IEC61000-4-2
- Passive, no power required
|