Clearance

Join our mailing list!






Alarm CCTV: Home > Tools
Sort By:
Page of 2
4.3" Hybrid IP / PTZ / CVI / TVI / CVBS Tester 7" HD TVI / CVBS Tester 3.5" TFT LCD CCTV Service Viewer with Wristband
Our Price: $675.00
Our Price: $412.50
Our Price: $240.00
4.3" Hybrid IP / PTZ / CVI / TVI / CVBS Tester 7" HD TVI / CVBS Tester 3.5" TFT LCD CCTV Service Viewer with Wristband

Product Code: AAS-LCD434-ICT
PIC: T-85

Features:
  • Touch-screen Display
  • 800x480 RGB Resolution
  • WiFi / PoE / Supports ONVIF
  • HDMI Output 1920x1080
  • Audio Input/Output
  • 12V Lithiium Battery Charger
  • 12V DC Input/Output


Product Code:
AAS-LCD702-HT
PIC: T-84

Features:
  • 800x480 RGB Resolution
  • Video Input: TVI & CVBS
  • Video Output: VGA / HDMI / CVBS
  • TVI Coaxial Control: Hikvision Protocol
  • 12.6V Lithium Battery
  • 12V DC Input/Output


Product Code: SS-LCD35SV
PIC: T-82

Features:
  • 3.5 inch TFT display screen
  • PAL / NTSC standard automatic detection
  • Display format 320 RGB x 240
  • 6 hours operation time
  • Provide power to 12V / 250mA Max - No High Power Camera
  • Audio and video input
  • USB universal charging interface
  • Battery save sleep mode - 3 minutes
  • Lithium Battery: 3.7V DC, 2200mA
All-in-One (IP/PoE, Analog, & PTZ Camera) Touch Screen Service Tester Seenway Magnetic Ultra Bright LED Light with Car Charger Seenway Two 1-watt Ultra Bright LED Light with Car Charger
Our Price: $675.00
Our Price: $75.00
Our Price: $82.50
All-in-One Touch Screen Service Tester LCDA-1 Seenway Ultra Bright LED Light with Car Charger Seenway Ultra Bright LED Light with Car Charger

Product Code: AAS-LCDA-1
PIC: T-83

Features:
  • Analog + IP + PTZ camera tester
  • Built-in 3.5” LCD monitor with QVGA resolution
  • 10/ 100Mbps Ethernet with RJ-45 connector
  • PTZ control/ command parse via Ethernet and RS-485 interface
  • Built-in touch panel/ keypad.
  • High capacity Lithium battery
  • UTP cable test
  • H.264 and MJPEG video compression
  • NTSC/PAL Video in/ Audio in/ Speaker out
  • PoE/ PoE+ function support (25.5W)
  • PoE voltage, current, and power consumption measurement
  • Local recording and playback
  • CGI command configuration
  • 3rd Party IP camera support


Product Code: SW-MR2031

Features:

  • Dual mode switch for task light (run time up to 4 hours) or flashlight (run time up to 30 hours)
  • Quick charge recharges in about 5 hours
  • Charges on 110/240 AC or cigarette charge play DC
  • Advanced Optics Lens – focused beam makes light output brighter and shines farther
  • Low battery indicator
  • Virtually indestructible construction magnet on back


Product Code: SW-MR2032

Features:

  • Powerful two 1-watt LEDs
  • Utility swivel hook
  • Cigarette charge plug adapter
  • Advanced Optics Lens – focused beam makes light output brighter and shines farther
  • Impact resistant, water proof, oil proof, IP64

Seenway Three 1-watt Ultra Bright LED Light with Car Charger BNC ( 8" ) Removal Tool, Economy. Pkg for Peghook BNC ( 12" ) Removal Tool, Economy. Pkg for Peghook
Our Price: $91.50
Our Price: $22.49
Our Price: $23.33
Seenway Ultra Bright LED Light with Car Charger BNC ( 8" ) Removal Tool BNC ( 12" ) Removal Tool

Product Code: SW-MR2033

Features:

  • Powerful three 1-watt LEDs
  • Utility swivel hook
  • Cigarette charge plug adapter
  • Advanced Optics Lens – focused beam makes light output brighter and shines farther
  • Impact resistant, water proof, oil proof, IP64

Product Code: PT-11008
  • 8" (203.2 mm) BNC Remover Tool
  • Manufactured for the professional installer on a budget
  • Used to insert and remove BNC connectors in digital video patch bays and in high-density DSX cross connect systems
  • Machined from tool steel and heat treated
  • Durable handle made from resin

Product Code: PT-11009
  • 12" (304.8 mm) BNC Remover Tool
  • Manufactured for the professional installer on a budget
  • Used to insert and remove BNC connectors in digital video patch bays and in high-density DSX cross connect systems
  • Machined from tool steel and heat treated
  • Durable handle made from resin

BR1 Multi-Stripper. Clamshell SealSmart II Compression Crimp Tool. Clamshell Premier CCTV Connectivity Kit, w/Zip Case
Our Price: $23.30
Our Price: $48.25
Our Price: $111.03
BR1 Multi-Stripper. Clamshell SealSmart II Compression Crimp Tool. Clamshell Premier CCTV Connectivity Kit, w/Zip Case
Product Code: PT-15041C
  • Coax cassette blades are pre-set
  • Adjustable stripper for twisted pair & audio cables
  • Cutters for both cable & wire conductors
  • Includes braid comb, Velcro, for folding the braid back over the cable jacket

Product Code: PT-16220C
  • Compact and lightweight design
  • Universal head works with all standard compression connectors
  • Easily terminate F, BNC and RCA connectors with a single tool
  • Works with right-angle and RGB mini connectors
  • Quickly and easily adjust crimp height

Product Code: PT-90202

10500C Coax & Round Wire Cable Cutter:
  • Cuts solid and stranded wires up to 8 AWG
  • Cuts multi-conductor cables up to a diameter of 1.5" (38.1mm)
  • Cuts coaxial cables without deforming the dielectric
  • Spring loaded with locking latch
15020C Double-Ended Coax Stripper:
  • Works with RG7/11/213/8 and RG59/6/6 Quad cables
  • Quickly removes cable jacket and dielectric
  • Preset; requires no adjustments
  • Compact, lightweight, and simple operation
16220C SealSmart II Compression Crimp Tool:
  • Crimps all standard F, RCA, BNC, and right-angle compression-style connectors
  • Works with RG-59, RG-6, RG-6 Quad, and Mini RGB coax cables
  • Lock washer holds head in place once adjusted to proper crimp stroke
19001C 6-in-1 Screwdriver:
  • Includes #1 and #2 Phillips
  • Includes #5 and #7 Slotted
  • Includes 1.25" (31.75mm) and 5.312" (134.92mm) nut drivers
18041 SealSmart BNC Connectors for RG59 Cable (8 Pieces):
  • Molded-in gasket provides a weather-tight seal at cable entry
  • Single crimp termination with captive center-contact design
  • Universal crimp tool terminates all 3 SealSmart Connector designs
  • Nickel plated

EZ-RJPRO HD Convenience Pack VDV MapMaster Tester. Clamshell 1" Standard CCP J-Hook, size 16. 100/Box
Our Price: $193.34
Our Price: $180.47
Our Price: $386.67
EZ-RJPRO HD Convenience Pack VDV MapMasterâ„¢ 1" Standard CCP J-Hook, size 16.  100/Box
Product Code: PT-100007

PT-100054 Features:
  • Zero flex frame prevents torque loss during the crimping cycle.
  • Tool steel die head assembly provides 360 degree of connector support during crimp.
  • Clean, ultra flush trim on the EZ-RJ45® extended conductors.
  • Expanded surface area on contact drivers delivers full, uniform crimp force.
  • Built in wire cutter and strippers.
PT-100003C Features:
  • Thru holes allow wire pairs to be inserted thru front of connector for faster terminations.
  • Works with solid or stranded wire.
  • Simple one piece design...no bars or liners.
  • FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks.
  • RoHS compliant
  • EZ to verify wire sequence.


Product Code: PT-T119C


Features:

  • Tests Voice (6 wire), Data (8 wire) and video (coax)
  • Easy to read, extra large 7-segment LCD screen with large icons
  • Tone generator with selectable tone cadence and selectable pins carrying tone
  • RJ (Voice & Data) master remote stores in bottom of case
  • Map 19 locations at one time, remotes sold separately
  • Tests and indicates pins with shorts, opens reversals, miswires and split pairs
  • Displays 'Pass' icon for correctly wired T568A/B 8 & 6 pin and crossover/uplink
  • Low power consumption for long battery life
  • Auto Power-Off
  • Made in the USA


Product Code: PT-CCP16-100


Features:

  • Pre-assembled attachments
  • Standard hook style
  • Suitable for telecom / voice, network / data, broadband, satellite, CCTV, fiber, and flexible conduit cables
  • Smooth edges that eliminate cable snags
  • Molded hook for fast lock and latch
  • EZ open and close
  • Plenum safe
  • Yellow zinc chromate finis
  • 100pcs/Box

Xtender Pole - 12, for ceilings up to 18' Bridle Ring, 10 X 24 - 3/4" ID. 100/Box. Eye Lag Wood Screw with 1/4" hole. 100/Box
Our Price: $374.17
Our Price: $104.03
Our Price: $16.58
Xtender Pole - 12, for ceilings up to 18' Bridle Ring, 10 X 24 - 3/4" ID.  100/Box. Eye Lag Wood Screw with 1/4" hole. 100/Box

Product Code: PT-JH712


Features:
  • Install hanging hardware from work floor. improves safety and efficiency
  • All-In-One adapter system for threaded rod, eye lag screws, wire & jack chain
  • Install multiple fastener types to a variety of ceiling structures - Elco® Hanger Mate® Buildex Sammy Super Screws® Powers Vertigo™
  • Powered with any 3\8
  • Includes female hex adapter for 1/4
  • Tips & Instruction Booklet
  • Also Available: Xtender Pole-18 (three 6' sections ceilings up to 24') P/N JH718


Product Code: PT-JH802-100


Features:
  • Material: Low carbon steel
  • Finish: Electro-Galvanized Zinc
  • Load Capacity (all sizes): Max static load 45 lbs
  • 100pcs/Box


Product Code: PT-JH940-100


Features:
  • High quality all steel construction
  • Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod
  • 100pcs/Box

Eye Lag Metal Screw, Self Drill with 1/4" hole 100/Box 1/4-20 Male Coupler with 1 1/2" Sharp Point, Wood Screw. 100/Box. 1/4-20 Male Coupler with 3/4" Self Drill, Metal Screw. 100/Box.
Our Price: $46.11
Our Price: $110.28
Our Price: $110.28
Eye Lag Metal Screwx 4-20  Male Coupler with 1 1/2" Sharp Point, Wood Screw Threaded Rod - 1/4-20 Male Coupler with 3/4" Self Drill Screw

Product Code: PT-JH941-100


Features:
  • Threaded and non-threaded holes to accommodate jack chains, ceiling wire or threaded rod
  • Can be used with vertical overhangs, eye lag screws, and pressed beam clamps
  • 100pcs/Box


Product Code: PT-JH950-100


Features:
  • High quality all steel construction
  • Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod
  • 100pcs/Box


Product Code: PT-JH951-100


Features:
  • High quality all steel construction
  • Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod
  • 100pcs/Box

Pressed Beam Clamp for 1/2" flanges, 1/4-20 threaded rod. 50/Box. Installation Tool for Vertical Overhang (JH901 & JH902) Double Ended Coax Stripper
Our Price: $81.59
Our Price: $76.39
Our Price: $24.88
Pressed Beam Clamp for 1/2" Flanges, 1/4-20 Threaded Rod Installation Tool for Vertical Overhang (JH901 & JH902) Double Ended Coax Stripper

Product Code: PT-JH965-50


Features:
  • High quality all steel construction
  • Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod
  • 50pcs/Box


Product Code: PT-JH975


Features:
  • High quality all steel construction
  • Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod
  • Tool: Vertical (JH901-100) and Angled Overhang (JH902-100)


Product Code: PT-15020C

  • Works with RG7/11/213/8 and RG59/6/6 Quad cable types
  • Quickly and easily remove the cable jacket and inner conductors in a single step
  • Control the cutting depth by the number of rotations made around the cable
  • Preset, no adjustments required

Bridle Ring, 10 X 24 - 2" ID. 100/Box Bridle Ring, 1/4 X 20 - 1 1/4" ID. 100/Box. Bridle Ring, 1/4 X 20 - 2" ID. 100/Box.
Our Price: $142.50
Our Price: $159.00
Our Price: $165.00
Bridle Ring, 10 X 24 - 2" ID. 100/Box Bridle Ring, 1/4 X 20 - 1 1/4" ID.  100/Box. Bridle Ring, 1/4 X 20 - 2" ID.  100/Box.

Product Code: PT-JH804-100


Features:
  • Material: Low carbon steel
  • Finish: Electro-Galvanized Zinc
  • Load Capacity (all sizes): Max static load 45 lbs
  • 100pcs/Box


Product Code: PT-JH807-100


Features:
  • Material: Low carbon steel
  • Finish: Electro-Galvanized Zinc
  • Load Capacity (all sizes): Max static load 45 lbs
  • 100pcs/Box


Product Code: PT-JH808-100


Features:
  • Material: Low carbon steel
  • Finish: Electro-Galvanized Zinc
  • Load Capacity (all sizes): Max static load 45 lbs
  • 100pcs/Box

Bridle Ring, 1/4"x20 - 4", 50/Box. Beam Clamp, 1/8" - 1/2", 100/Box. Beam Clamp 1/8" - 1/2" for BR, 100/Box.
Our Price: $142.50
Our Price: $135.00
Our Price: $159.00
Bridle Ring, 1/4"x20 - 4", 50/Box. Beam Clamp, 1/8" - 1/2", 100/Box. Beam Clamp 1/8" - 1/2" for BR, 100/Box.

Product Code: PT-JH809-50


Features:
  • Material: Low carbon steel
  • Finish: Electro-Galvanized Zinc
  • Load Capacity (all sizes): Max static load 45 lbs
  • 50pcs/Box


Product Code: PT-JH966-100


Features:
  • E-Z installation to beam flanges up to 1/2"
  • Supports 1/4" and 3/8" threaded rod, S-hooks, and bridle rings
  • Accommodates standard 1/4-20 or #10-24 threaded bridle rings


Product Code: PT-JH967-100


Features:
  • Supports drive rings or bridle rings
  • Accommodates any beam flange from 1/8" - 1/2" thickness
  • Requires only a hammer to install